LEMAG LUBEmag

PERMANENT CYLINDER OIL MEASURING SYSTEM

• Permanent display of specific
  cylinder oil consumption (SCOC)
  
  
• Display of daily cylinder
  oil consumption
  
  
• Manual bypass pipe
  
  
• Reliable and safe operation
  
  
• Touch-screen operated
  
  
  

The LEMAG LUBEmag system is designed to measure the specific cylinder oil consumption of 2-stroke engines in combination with the LEMAG Shaftpower system. This can reduce wear of engine components caused by either under or overlubrication and can also show potential cost savings by avoiding any excessive consumption of cylinder liner lube oil.

One of the major design targets was to avoid any increase of the pipe resistance. The LEMAG LUBEmag system is suitable for all gravity driven lube oil supply systems and only requires a small installation footprint due to its vertical design.

The system consists of two stainless steel tanks, which are filled and discharged automatically, alternating via two 2/3-way valves. Both tanks are aerated and protected against overfilling.

The time the system takes to discharge the measuring tanks is the basis for the calculation of the actual cylinder oil consumption.  The level of the cylinder oil inside the measuring tanks is controlled by level switches. Their signals are transferred to an electronic controller, which in turn communicates with the LEMAG Shaftpower system. The consumption values are then indicated on the SHAFTPOWER touch-screen display.

In case of a "black out", the 2/3 way valves will directly connect the cylinder oil pipe without any measuring cycle with help of an integrated spring return. The LEMAG LUBEmag system is also equipped with a manual bypass pipe with an integrated 2-way ball valve is included, herewith fulfilling all classification requirements.

---

Download PDF overview LEMAG LUBEmag